Application Instructions

Citra-Shield Ready-To-Use

Application: Carefully read all instructions on label. As a precaution, wet surrounding plants and flowers with water before and after applying Citra-Shield. Remember there is algae on plants too. Apply Citra-Shield Ready-To-Use to your stained exterior surface until saturated. Citra-Shield is best applied in dry conditions. Do not apply in the rain. To maximize results it is best to let product dry (4-5 hours) on surface before any rain showers. Temperatures need to be above 32 degrees during application and for approximately 4 hours after. 

Use Citra-Shield to remove ugly green and black stains cause by mold, mildew, algae, moss and lichen on the following surfaces.

  • Roofs: composite, tile, shake, cement, rubber, metal, slate, fiberglass
  • Decking: wood, composite, vinyl, pavers, concrete
  • Siding: vinyl, aluminum, composite, wood
  • Stucco
  • Brick
  • Awnings: cloth and vinyl
  • Tennis Courts & Tracks
  • Pool Surrounds
  • Outdoor Furniture: cloth, vinyl, metal, PVC, aluminum, umbrellas
  • Landscaping Stones
  • Flower Pots
  • Driveways & Sidewalks
  • Fences: brick, wood, composite, concrete, stucco, vinyl, aluminum, PVC
  • Boats & RVs
  • Gravestones, Monuments, Mausoleums

Moss Treatments: To get rid of moss, it is important thoroughly saturate the moss with Citra-Shield Ready To Use. Citra-Shield must come in contact with the surface the moss is attached to. For heavy moss covered surfaces, use a broom or brush to remove as much of the moss as possible then apply Citra-Shield. This will speed up the removal process. Over the next few days or weeks, you will notice the moss changing color and detaching from the surface. The wind and rain will help wash away any remaining moss.

Citra-Shield Concentrate

Materials Needed

  • Citra-Shield Concentrate
  • Garden Pump Sprayer or Citra-Shield Applicator
  • Ladder – if necessary
  • Hose with spray nozzle

Directions For Use: Throughly read all instructions. Keep spray off plants & flowers and/or wet surrounding area before and after applying Citra-Shield. Remember there is algae on plants too. Use caution when applying as treated surface may become slippery. We recommend using eye protection and gloves when mixing or applying Citra-Shield.  See product label for precautionary statement, treatment, storage and disposal information. Do not mix Citra-Shield with detergents or other chemicals. Avoid application on windy days.

Initial Application: Mix 5 parts water and 1 part Citra-Shield Concentrate in any garden pump sprayer or Citra-Shield Applicator. Always add water first then mix Citra-Shield into the water. Apply a thorough coat of diluted product to all affected areas at least 4 hours prior to any rainfall or snow. For roof applications, apply product from the edge of the roof towards the peak. Try to avoid walking on roof surface. If you are unfamiliar with heights or ladders, you should hire a roof cleaning specialist and request that they use Citra-Shield Cleaning Products. Do NOT rinse. The stains will begin to disappear with rainfall over the next 1-6 months for roof surfaces and within 1-6 weeks for all other exterior surfaces. Stains may appear darker or change colors immediately after application. 

For Quicker Results: Follow initial application instructions then allow product to dwell on surface for 12- 24 hours. For rinsing, wait 12-24 hours and rinse thoroughly using a pressure washer (45 degree nozzle tip) with the wand at least 3 feet from surface. DO NOT USE HIGH PRESSURE ON ROOFS or STUCCO. After rinsing, Citra-Shield will continue to clean and prevent stains from returning. 

Preventive Application: For new exterior surfaces and surfaces that have already been cleaned with Citra-Shield. A preventative solution of 9 parts water to 1 part Citra-Shield Concentrate can be applied every 6-12 months to prevent the stains from re-appearing.